Effect of BaTiO3 and Chitosan Composite Material on the Enhancement of the Sensitivity and Limit of Detection of the Surface Plasmon Resonance Sensor-Divergent Beam Based
Abstract
The SPR sensor's poor sensitivity and low limit of detection (LOD) limit its use for tiny contamination detection when the measured sample ranges from 1.3317 to 34. Thus, study examined the combined influence of CaF2/ZnO/TiO2/Silver/BaTiO3/Chitosan on the performance of an SPR biosensor employing the Kretschman configuration. The proposed SPR sensor use the Kretschmann configuration, which employs the divergence beam produced by the Powell lens to avoid mechanical rotation. Through the use of an STM32F401RE controller with 12-bit ADC, it was determined that the proportionate alloying of BaTiO3 and chitosan with optimal thickness could enhance the designed SPR sensor's theoretical sensitivity to 480.45˚/RIU and limit of detection (LOD) to. Thus proposed SPR sensor showed the improvement in sensitivity and LOD by 16.67% and 33.69%, respectively, as compared to the SPR sensor without the combined effect of optimal chitosan and BaTiO3 thickness
Downloads
References
Fu, H., et al., Graphene enhances the sensitivity of fiber-optic surface plasmon resonance biosensor. IEEE Sensors Journal, 2015. 15(10): p. 5478-5482.
Shalabney, A. and I. Abdulhalim, Electromagnetic fields distribution in multilayer thin film structures and the origin of sensitivity enhancement in surface plasmon resonance sensors. Sensors and Actuators A: Physical, 2010. 159(1): p. 24-32.
Daher, M.G., et al., Surface plasmon resonance biosensor based on graphene layer for the detection of waterborne bacteria. Journal of Biophotonics, 2022. 15(5): p. e202200001.
Filion-Côté, S., et al., Monitoring of bacterial film formation and its breakdown with an angular-based surface plasmon resonance biosensor. Analyst, 2017. 142(13): p. 2386-2394.
Gupta, B.D., A. Pathak, and V. Semwal, Carbon-based nanomaterials for plasmonic sensors: a review. Sensors, 2019. 19(16): p. 3536.
Jha, R. and A.K. Sharma, High-performance sensor based on surface plasmon resonance with chalcogenide prism and aluminum for detection in infrared. Optics letters, 2009. 34(6): p. 749-751.
Siegfried, T., et al., Engineering metal adhesion layers that do not deteriorate plasmon resonances. ACS nano, 2013. 7(3): p. 2751-2757.
Maurya, J.B. and Y.K. Prajapati, Influence of adhesion layer on performance of surface plasmon resonance sensor. IET Optoelectronics, 2018. 12(4): p. 168-175.
Mei, G.S., P.S. Menon, and G. Hegde, ZnO for performance enhancement of surface plasmon resonance biosensor: a review. Materials Research Express, 2020. 7(1): p. 012003.
Das, C.M., et al., Computational modeling for intelligent surface plasmon resonance sensor design and experimental schemes for real‐time plasmonic biosensing: A Review. Advanced Theory and Simulations, 2023. 6(9): p. 2200886.
Maurya, J.B., et al., Sensitivity enhancement of surface plasmon resonance sensor based on graphene–MoS2 hybrid structure with TiO2–SiO2 composite layer. Applied Physics A, 2015. 121(2): p. 525-533.
Mitsushio, M., K. Miyashita, and M. Higo, Sensor properties and surface characterization of the metal-deposited SPR optical fiber sensors with Au, Ag, Cu, and Al. Sensors and Actuators A: Physical, 2006. 125(2): p. 296-303.
Sharma, A.K. and A.K. Pandey, Blue Phosphorene/MoS2 Heterostructure Based SPR Sensor With Enhanced Sensitivity. IEEE Photonics Technology Letters, 2018. 30(7): p. 595-598.
Rouf, H.K. and T. Haque, Sensitivity Enhancement of Graphene-MoSe2–Based SPR Sensor Using Ti Adhesion Layer for Detecting Biological Analytes. Plasmonics, 2021. 16(6): p. 1945-1954.
Karki, B., et al., Sensitivity enhancement of refractive index-based surface plasmon resonance sensor for glucose detection. Optical and Quantum Electronics, 2022. 54(9): p. 595.
Almawgani, A.H., et al., Optical detection of fat concentration in milk using MXene-based surface plasmon resonance structure. Biosensors, 2022. 12(7): p. 535.
Cai, W., et al., Preparation and optical properties of barium titanate thin films. Physica B: Condensed Matter, 2011. 406(19): p. 3583-3587.
Singh, S., J. Remeika, and J. Potopowicz, Nonlinear optical properties of ferroelectric lead titanate. Applied Physics Letters, 1972. 20(3): p. 135-137.
Srivastava, A., R. Das, and Y.K. Prajapati, Effect of perovskite material on performance of surface plasmon resonance biosensor. IET Optoelectronics, 2020. 14(5): p. 256-265.
Liu, L., et al., Sensitivity enhancement of a graphene–barium titanate-based surface plasmon resonance biosensor with an Ag–Au bimetallic structure in the visible region. JOSA B, 2019. 36(4): p. 1108-1116.
Sun, P., et al., Sensitivity enhancement of surface plasmon resonance biosensor based on graphene and barium titanate layers. Applied Surface Science, 2019. 475: p. 342-347.
Mudgal, N., et al., ZnO and Bi-metallic (Ag–Au) layers based surface plasmon resonance (SPR) biosensor with BaTiO3 and graphene for biosensing applications. IETE Journal of Research, 2020: p. 1-8.
Pal, A. and A. Jha, A theoretical analysis on sensitivity improvement of an SPR refractive index sensor with graphene and barium titanate nanosheets. Optik, 2021. 231: p. 166378.
Ishtiak, K.M., S.-A. Imam, and Q.D. Khosru, BaTiO3-Blue Phosphorus/WS2 hybrid structure-based surface plasmon resonance biosensor with enhanced sensor performance for rapid bacterial detection. Results in Engineering, 2022. 16: p. 100698.
Hossea, J.H. and G. Rugumira, Analytical Design of a Portable Surface Plasmon Resonance Sensor by Using a Divergence Beam for Measuring Multiple Heavy Metals and Other Contamination Simultaneously. East African Journal of Engineering, 2024. 7(1): p. 148-161.
Fouad, S., et al., Enhanced sensitivity of surface plasmon resonance sensor based on bilayers of silver-barium titanate. Журнал нано-та електронної фізики, 2016(8,№ 4 (2)): p. 04085-1-04085-5.
Fen, Y.W., et al., Surface plasmon resonance optical sensor for mercury ion detection by crosslinked chitosan thin film. Journal of Optoelectronics and Advanced Materials, 2011. 13(March 2011): p. 279-285.
Nasiri, H. and K. Abbasian, High-sensitive surface plasmon resonance sensor for melamine detection in dairy products based on graphene oxide/chitosan nanocomposite. Food Control, 2024. 166: p. 110761.
Lokman, N.F., et al., Highly sensitive SPR response of Au/chitosan/graphene oxide nanostructured thin films toward Pb (II) ions. Sensors and Actuators B: Chemical, 2014. 195: p. 459-466.
Zhang, Y.-n., et al., Optical fiber sensors for measurement of heavy metal ion concentration: A review. Measurement, 2020. 158: p. 107742.
Malitson, I.H., A redetermination of some optical properties of calcium fluoride. Applied Optics, 1963. 2(11): p. 1103-1107.
Bass, M., et al., Handbook of Optics, Volume V: Atmospheric Optics, Modulators, Fiber Optics, X-Ray and Neutron Optics. 2009: McGraw-Hill, Inc.
Jorgenson, R.C. and S.S. Yee, A fiber-optic chemical sensor based on surface plasmon resonance. Sensors and Actuators B: Chemical, 1993. 12(3): p. 213-220.
Johnson, P.B. and R.-W. Christy, Optical constants of the noble metals. Physical review B, 1972. 6(12): p. 4370.
Wemple, S., M. Didomenico Jr, and I. Camlibel, Dielectric and optical properties of melt-grown BaTiO3. Journal of Physics and Chemistry of Solids, 1968. 29(10): p. 1797-1803.
Fen, Y.W., et al., Optical properties of crosslinked chitosan thin film with glutaraldehyde using surface plasmon resonance technique. American Journal of Engineering and Applied Sciences, 2011. 4(1): p. 61-65.
Rahman, M.M., et al., Sensitivity enhancement of SPR biosensors employing heterostructure of PtSe2 and 2D materials. Optical Materials, 2020. 107: p. 110123.
Meshginqalam, B. and J. Barvestani, Performance enhancement of SPR biosensor based on phosphorene and transition metal dichalcogenides for sensing DNA hybridization. IEEE sensors Journal, 2018. 18(18): p. 7537-7543.
Karki, B., et al., Titanium dioxide, black phosphorus and bimetallic layer-based surface plasmon biosensor for formalin detection: numerical analysis. Optical and Quantum Electronics, 2022. 54(7): p. 451.
Ceballos-Zumaya, J., et al., Performance parameters as a function of graphene’s chemical potential for SPR biosensor based on 2D materials. Optik, 2024: p. 172013.
Vlcek, J., J. Pistora, and M. Lesnák. Sensitivity enhancement in surface plasmon resonance sensors: theoretical modeling. in Optical Sensors 2009. 2009. SPIE.
Sharma, A.K. and A. Dominic, Influence of chemical potential on graphene-based SPR sensor’s performance. IEEE Photonics Technology Letters, 2017. 30(1): p. 95-98.
Anjitha, M., et al., Hybrid Design Architecture and Sensitivity Analysis of Cu Based Surface Plasmon Resonance Sensors. Research Transcripts in Materials, 2021. 1: p. 17-34.
Masson, J.-F., Surface plasmon resonance clinical biosensors for medical diagnostics. ACS sensors, 2017. 2(1): p. 16-30.
Vasimalla, Y., H.S. Pradhan, and R.J. Pandya, Sensitivity enhancement of the SPR biosensor for Pseudomonas bacterial detection employing a silicon-barium titanate structure. Applied Optics, 2021. 60(19): p. 5588-5598.
Singh, T.I., P. Singh, and B. Karki, Early detection of chikungunya virus utilizing the surface plasmon resonance comprising a silver-silicon-PtSe2 multilayer structure. Plasmonics, 2023. 18(3): p. 1173-1180.
Karki, B., et al., PtSe2 and black phosphorus employed for sensitivity improvement in the surface plasmon resonance sensor. Journal of Computational Electronics, 2023. 22(1): p. 106-115.
Sharma, V., L.K. Dwivedi, and S.K. Singh, Graphene-Coated Surface Plasmon Resonance (SPR) Sensor for Detection of Preservatives in Milk: A Theoretical Investigation. 2023.
Taya, S.A., et al., A surface plasmon resonance nanostructure containing graphene and BaTiO3 layers for sensitive defection of organic compounds. Royal Society Open Science, 2023. 10(6): p. 230282.
Kumar, V., S.K. Raghuwanshi, and S. Kumar. Novel surface plasmon resonance (SPR)-based biosensor for pathogenic bacteria detection (PathoBactD). in Optical Interactions with Tissue and Cells XXXV. 2024. SPIE.
Kashyap, R., U.R. Baruah, and B. Mondal. BaTiO 3 and Blue Phosphorus-MoS 2/WS 2 hybrid structure based Surface Plasmon Resonance sensor with improved sensing performance. in 2023 16th International Conference on Sensing Technology (ICST). 2023. IEEE.
Yesudasu, V., et al., Surface-Plasmon and Titanate Material-Assisted Sensor Structure for Pseudomonas Bacteria Detection With Increased Sensitivity. IEEE Transactions on AgriFood Electronics, 2024.
Kumar, V., S.K. Raghuwanshi, and S. Kumar, Nanomaterial-based surface plasmon resonance sensing chip for detection of skin and breast cancer. Plasmonics, 2024. 19(2): p. 643-654.
Kumar, V., S.K. Raghuwanshi, and S. Kumar, Highly sensitive Ag/BaTiO3/MoS2 nano composite layer based SPR sensor for detection of blood and cervical cancer. Results in Optics, 2024. 14: p. 100597.
Daher, M.G., et al., Optical biosensor based on surface plasmon resonance nanostructure for the detection of mycobacterium tuberculosis bacteria with ultra-high efficiency and detection accuracy. Plasmonics, 2023. 18(6): p. 2195-2204.
Copyright (c) 2024 Jordan H. Hossea

This work is licensed under a Creative Commons Attribution 4.0 International License.